Cut power at the fuse box for outdoor roof fixture. Remove the old game order, if any, by removing the screws that hold it in the ceiling. Pull down enough to disconnect the wires behind it, and then pull it completely. Generally, there will be a black, one white and one cold copper one. Find the mounting plate that comes with a ceiling fan. Attach it to the roof rack by screwing up the screw holes in the plate to the screw holes at the box and insert the supplied screws. The leads from the box should still be available around the mounting plate.
Attach the fan to the mounting plate by raising the holes at the fan assembly into the holes in the mounting plate and insert the supplied screws. Turn on the power and test the fan. When you are confident that the engine is spinning properly, turn it off and install the fan blades by unscrewing the screw holes at the inner ends of each blade with the proper screw holes on the housing and insert the included screws. If the electric drawer moves at all when you wear it, it means that it is not correctly mounted roof beams and can’t safely hold the weight of the fan. Have a contractor inspect and secure the box before proceeding.
Exterior ceiling fans – For a veranda that is inviting and comfortable in the summer, consider hanging a ceiling fan outside. All exterior ceilings that have an present ceiling lamp can have a fan installed instead of it, with the fan connected to the identical electrical field and controlled by precisely the same power switch. It is precisely the same process as installing an internal fan, but the fan itself is specialized with stainless steel materials. Do not install on the exterior ceiling fans. (Note: If there is no current light, you must have an electrician run a circuit and install a roof box.)
Tighten the screw. Just take the blower unit (without the blades attached) up the ladder and place it on top of the ladder, close to the electrical box. Connect the white cable from the fan to the white cable from the cabinet, hold the cable ends next to each other and twist a wire cap over them both. If your canvas has a blue thread and (for a light), attach the blue ribbon together with the black threads.
This gallery is about exterior ceiling fans.