Some blinds are functional, while others are designed only for visual appeal they are fixed to the house, not to close. Remove an old shutter by unscrewing it from the hardware. Unscrew the lower hinge first, then the top. Order replacement louvers that fit the space utilizing the measurements. You may order alternative wood or vinyl retort shutters.
Wooden Shutters Exterior – Decorative blinds serve no real functional aim of the way blinds did before. However, they do add a great touch to the exterior of the home, along with a touch of color. Select a color that complements your home, and decide on a material that is practical for your situation. Wood needs to be painted but tends to look higher. Lift the shutter to the side of the window. Let someone else do this, which means you can step back and evaluate the position of the shutter.
Use a level to make adjustments and mark the location at the top, bottom, and sides. Trace through the holes that are utilised to attach blinds to the wall, so you will have puncture marks, precisely where you need them. Mark the place where the decorative shutter lock will be put on the shutter. Make sure these marks are consistent on all blinds. Measure out the window for the shutter, and from the bottom of the house. You will use these measurements to place the other blinds after installing the first one. Pilot holes from the blinds, using a 1/4-inch drill bit. Drill the same pilot hole in the wall to a depth of 3-1 / 4 inches. If you are going to drill in brick, use a carbide bit.
Touch the wooden shutters exterior locks through the seal and into the wall until the shutter is flush with the wall and the lock is flush with the shutter. If your house is made of brick, you will need to position the blinds so that the holes align with the mortar lines. Slat blinds have parallel slats spaced diagonally within a frame to create a barrier that provides privacy while allowing light and air to filter through the window.
This gallery is about wooden shutters exterior.